F5 BIG-IP 8950 Platform Manual Download

Page: 46 / 56

General specifications for system features

This table lists general specifications for BIG-IP

system features for the 8950 platform.

Specification

Item

Load balancing of any TCP/IP operating system: 32- and 64-bit
Windows

operating systems, including Windows 95, Windows 98,

Server/Node operating system
compatibility

Windows NT, Windows 2000, Windows XP, Windows Vista,
Windows 7; all UNIX

platforms; and Mac OS

All TCP services, UDP, SIP, and SSL; nearly all IP-based protocols

Internet/Intranet protocol support

DNS proxy, SMTP, SSH, SNMP, dynamic/static network monitoring,
scheduled batch job processing, system status reports, and alarms
event notification

Administrative environment support

Secure SSL browser-based interface, remote encrypted logon and
file transfer using SSH monitor, BIG-IP system network monitoring

Network management and
monitoring

utilities and additional contributed software; SNMP gets and traps;
iControl API using CORBA and SOAP/XML

ASP, VB, ActiveX, Java, VRML, CGI, Cool Talk, Net Meeting,
Real Audio, Real Video, Netshow, QuickTime, PointCast, or any
HTTP-encapsulated data

Dynamic content support

Watchdog timer, failsafe cable (primary and secondary)

Device redundancy

Support for hot swap of the SFP modules

SFP hot swap

Any IP-based web or application server

Web server application compatibility

RIP, OSPF, and BGP with optional ZebOS Advanced Routing
Modules

Routing protocols

Important: Specifications are subject to change without notification.

Platform hardware specifications

This table lists hardware specifications for the 8950 platform.

Specification

Item

H: 3.5 inches (8.89 cm) x W: 17.75 inches (45.09 cm) x D: 20.75
inches (52.71 cm) (per unit) 2U industry standard rack-mount chassis

Dimensions

45.5 pounds (20.64 kg) with two power supplies, two hard drives,
and bezel installed (per unit)

Weight

•

Front mount rack brackets add 1 pound (0.45 kg).

•

Quick install rail kit adds 5.5 pounds (2.27 kg).

•

Hard drives add 1.5 pounds (0.68 kg) each.

Platform Specifications

Summary of Contents for BIG-IP 8950

























































Search results

Summary of Contents for BIG-IP 8950

Reviews:

Related manuals for BIG-IP 8950

Brands by name

Popular brands

F5 BIG-IP 8950, Platform Manual

Search results

Summary of Contents for BIG-IP 8950

Reviews:

Related manuals for BIG-IP 8950

Brands by name

Popular brands