F5 ARX-4000, Hardware Installation Manual

Page: 31 / 94

Regulatory Compliance
ARX®4000 Hardware Installation Guide 3 - 3
Regulatory Compliance
The ARX complies with the following agency requirements:
FCC Compliance
Important
This is a Class A product. In a domestic environment this product may cause
radio interference, in which case the user may be required to take adequate
measures.
Changes or modifications not expressly approved by the manufacturer could
void your FCC-granted authority to operate this equipment.
Note
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against interference when the
equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
Category Compliance
Safety • UL 60950
• ETL Listed
• IEC950 (EN60950) CE Marking
Emissions • FCC Part 15 Class A
• CISPR22 Class A (EN55022) CE Marking
• EN 55024
• VCCI Class 1