F4Devices Flint, Operator'S Manual

Page: 81 / 93

GeoAssist Software
8-5
3. For Canopy Environments – Precision, High-Multipath Environments
SBAS
SBAS is enabled by default to automatically (auto-scan) locate the SBAS for the
local position. The GeoAssist Premium version gives you the following control over
SBAS:
•
Subsystem:
1. Disable – Turn SBAS off
2. Enable – Turn SBAS on
•
PRN Codes
Choose the SBAS that system that best fits your needs
•
Press Apply when ready (In order for Apply to be active, the GPS must be
started)
Network DGPS
•
Host: Enter your host name IP Address
•
Port: Enter the Port given by provider
•
User ID: Enter your User ID
•
Password: Enter your Password
•
Advanced – Some NTRIP Servers require the GGA string in order to process the
correction, here you can set from where the GGA string is sent.
•
When the settings are correct, press the
Connect
button