F-SECURE POLICY MANAGER 7.0 -, Administrator'S Manual, Page: 65 / 241

65
5.1 Overview
F-Secure Policy Manager Console can operate in two modes:
Administrator mode - you can use F-Secure Policy Manager
Console to its full extent.
Read-Only mode - you can view F-Secure Policy Manager
Console information but cannot perform any administrative tasks
(this mode is useful for such users as Helpdesk personnel).
The same console installation can be used for both Administrator and
Read-Only connections. The following sections explain how to run the
F-Secure Policy Manager Console setup from the F-Secure CD, and how
to select the initial operation mode when the console is run for the first
time. The CD setup is identical for both modes, and it is always possible
to add new Administrator and Read-Only connections after the initial
startup.
5.2 Installation Steps
Step 1.
1. Insert the F-Secure CD in your CD-ROM drive.
2. Select Corporate Use . Click Next to continue.
3. Select F-Secure Policy Manager from the Install or Update
Management Software menu.