F-SECURE POLICY MANAGER 7.0 -, Administrator'S Manual

Page: 58 / 241

CHAPTER 3 58
Installing F-Secure Policy Manager Server
For more information on the settings you can read the httpd.sample file
that is located in the same directory as the configuration file of F-Secure
Policy Manager Server (<fspms installation directory>\conf).
mod_gzip_on Yes: This setting is one of the several compression
settings, and the one that enables or disables support for the
compression in F-Secure Policy Manager Server. Compression is
disabled if the setting is changed to mod_gzip_on No.
FastPolicyDistribution On: This is a performance versus maximum
backward compatibility switch. When enabled (On) it will allow the
F-Secure Policy Manager Server to distribute policies in a way that
speeds up the process greatly (30-100 times, depending on the number
of hosts). The disabled switch (Off) should be used when there are other
components accessing the communication directory concurrently (e.g.
F-Secure Management Agent).
RetryFileOperation 10: This setting tells the server how many times it
should retry a failed file operation (with a 1 second retry-interval) before
giving up.
CommdirCacheSize 10: The number-value of this setting informs the
server how much memory, percentage-wise, it should use for storing files
in memory before serving them. This will allow the server to serve the files
much faster, since it will not have to read them from the disk all the time. If
you use the default (10), the server will use 10% of the memory available
for this cache. For example, in a 512MB RAM machine, it will use 51,2
MB for the cache.
3.5 Uninstalling F-Secure Policy Manager Server
To uninstall F-Secure Policy Manager Server (or other F-Secure Policy
Manager components), follow these steps:
1. Open the Windows Start menu and go to Control Panel . Select Add/
Remove Programs.
2. Select F-Secure Policy Manager Server (or the component you want
to uninstall), and click the
Add/Remove button.