F-SECURE POLICY MANAGER 7.0 -, Administrator'S Manual

Page: 194 / 241

CHAPTER 10 194
Web Reporting
1. Stop F-Secure Policy Manager Server.
2. Edit the Web Reporting port (
Listen
) and
VirtualHost
parameters
in the httpd.conf file so that they contain the new port number.
3. Start F-Secure Policy Manager Server.
If there is a port conflict, F-Secure Policy Manager Server will not start,
and an error message will be printed in the log file. In this case you should
try another, unused port.
10.5.5 Creating a Backup Copy of the Web Reporting
Database
You can create a backup of the Web Reporting database on a backup
media as follows:
1. Stop the F-Secure Policy Manager Web Reporting service.
2. Copy the file
C:\Program Files\F-Secure\Management Server 5\Web
Reporting\firebird\data\fspmwr.fdb
to the backup media. You can also use some compression utility to
compress the file. Using a compression utility also provides you a
means to check that the backed up database is still intact.
3. Restart F-Secure Policy Manager Web Reporting Service
10.5.6 Restoring the Web Reporting Database from a Backup
Copy
You can restore the F-Secure Policy Manager Web Reporting database
from a backup copy as follows:
A backup copy protects historical data against corruption. It can
also be used to archive old data that would be deleted when the
maximum data storage time in the Web Reporting database is
modified (see
“
Changing the Maximum Data Storage Time in the
Web Reporting Database ”, 195).