F-SECURE ANTI-VIRUS - FOR MICROSOFT EXCHANGE, Deployment Manual

Page: 59 / 115

CHAPTER 3 57
Installation
For more information, consult F-Secure Anti-Virus for Microsoft Exchange
Administrator’s Guide.
Network Configuration
The mail direction is based on the Internal Domains and Internal SMTP
senders settings and it is determined as follows:
1. E-mail messages are considered internal if they come from internal
SMTP sender hosts and mail recipients belong to one of the specified
internal domains (internal recipients).
2. E-mail messages are considered outbound if they come from
internal SMTP sender hosts and mail recipients do not belong to the
specified internal domains (external recipients).
3. E-mail messages that come from hosts that are not defined as
internal SMTP sender hosts are considered
inbound .
4. E-mail messages submitted via MAPI or Pickup Folder are treated as
if they are sent from the internal SMTP sender host.
If F-Secure Anti-Virus for Microsoft Exchange has been installed in the
centralized administration mode, configure the mail direction with
F-Secure Policy Manager Console.
If F-Secure Anti-Virus for Microsoft Exchange has been installed in
stand-alone mode, configure the mail direction with F-Secure Anti-Virus
for Microsoft Exchange Web Console.
If e-mail messages come from internal SMTP sender hosts and
contain both internal and external recipients, messages are split
and processed as internal and outbound respectively.
For more information, consult F-Secure Anti-Virus for Microsoft
Exchange Administrator’s Guide.