12
Manager Console will use a Remote Installation Wizard to
configure the F-Secure Client Security installation.
2. Add new workstations to a suitable policy domain when the
installation is complete.
3. Configure the F-Secure Client Security settings for the
workstations. The domain level settings are shared by all
workstations in the policy domain.
4. Distribute the policies. The managed workstations will receive
the updated policy the next time they connect to the server.
2.2.3 Local Installation and F-Secure Policy Manager
Local installation is recommended if you need to install F-Secure
Client Security locally on a workstation that is otherwise centrally
managed by F-Secure Policy Manager. You must have F-Secure
Policy Manager already installed before you can continue with the
installation.
For instructions, see chapter Adding Hosts in
F-Secure Client Security Administrator’s Guide.
For instructions, see chapters Configuring Virus &
Spy Protection and Configuring Internet Shield in
F-Secure Client Security Administrator’s Guide.
