F-SECURE ANTI-VIRUS FOR MICROSOFT EXCHANGE 6.62 -, Administrator'S Manual

Page: 59 / 397

CHAPTER 3 59
Installation
3.6 After the Installation
This section describes what you have to do after the installation. These
steps include:
„
Importing product MIBs to F-Secure Policy Manager (if that is
required), and
„
Initial configuration of the product.
3.6.1 Importing Product MIB files to F-Secure Policy Manager
Console
If you are using the product in centrally managed mode, there are cases
when the F-Secure Anti-Virus for Microsoft Exchange MIB JAR file cannot
be uploaded to F-Secure Policy Manager Server during the installation. In
these cases you will have to import the MIB files to F-Secure Policy
Manager. You will have to import the MIB files if:
„
F-Secure Anti-Virus for Microsoft Exchange is located in a
different network segment than F-Secure Policy Manager, and
there is a firewall between them blocking access to Policy
Manager’s administrative port (8080).
„
F-Secure Policy Manager Server has been configured so that
administrative connections from anywhere else than the localhost
are blocked.
The recommended way is to import the MIBs via F-Secure Policy
Manager Console
Tools menu. You can do it as follows:
1. Open the Tools menu and select the Installation packages... option.
2.
Click Import... .
3.
When the Import Installation Packages dialog opens, browse to
locate the
fsavmse660.mib.jar file located under the Jars subdirectory
in the setup package. Then click Open .
4.
After importing the new MIB files, restart F-Secure Policy Manager
Console.