①
②
Battery tube
③
Light Head
Tail Cap
Diving Backup Light
1
2
3
Spot Light (1pcs)
Battery clamp
Diving backup light
Brightness
650 lumen ( 1 * 18650 Li-ion )
④
O Ring 2pcs
Switch Button
Battery Level Indicator
350 lumen ( 3 *AAA )
Beam Angle
Run time
LED
Parameters
Over 50000 hours
LED Life
Aviation aluminum
Material
Hard anodic oxidation
Oxidation
Size
Weight
3 *AAA : 170 (in air), 70g (in water)
F.I.T. PRO LED650
Specifications
(LED Light)
(Lumen)
10 Degress
Battery
1 * 18650 Li-ion or 3 *AAA
approx.90 min
+ 10 min
Waterproof
100m / 330ft
1pcs XM-L2 U2
34 (D) x 133.3 (L) mm
-Component .............................................1
-Specifications .............................................2
-Unpacking .............................................3
-Battery Loading .............................................3
Contents
Component
Unpacking
Please read carefully before using the manual
-Operating Instructions ............................................ 4
-Temperature Protection .............................................5
-Battery Level Indicator ............................................ 5
-Automatic Overheat Protection ............................................ 5
-Charge the battery ............................................ 5
-Care and Maintenance ............................................ 6
-Warning ............................................ 6
-Standard Warranty ............................................ 7
-Troubles Solution ............................................ 7
<Instruction>
<How to use>
<Maintenance and Warranty>
(In water)
1 * 18650 Li-ion: 175g (in air), 80 (in water)
1.
Anti-clockwise rotate to open the tail cap;
2. Loading 3*AAA batteries into the battery clamp and loading
3.
Holding the light head and attach the tail cap by rotating
the battery into the tail cap.(Or loading 18650 Li-ion battery
Battery Loading
clockwise.
battery must match the polarity of the contacts.
Battery Clamp
⑤
Wrist lanyard
with the battery tube into the tail cap.) The polarity of the
