MANUAL
ASPIRATOR BLOWER
www.ffgroup-tools.com
|
3
1
2
4
3
5
6
Technical Data
1 Nozzle
2 Blast port
3 Trigger switch
4 Variable Speed Knob
5 Lock on button
6 Suction port
7 Dust bag
SAFETY POINTS FOR ASPIRATOR BLOWER
• Do not collect still smoldering cigarette ashes,
freshly cut metals shaving, screws, nails and the like.
• Never block suction inlet and outlet.
Product Description and Specifications
Read all safety warnings and safety instructions.
Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious injury.
While reading the operating instructions, unfold
the graphics page for the machine and leave it open.
Intended Use
The aspirator blower is designed for blowing &
cleaning applications, as well as light suction purpose.
Product Features
The numbering of the product features refers to the illustration
of the machine on the graphics page.
Assembly
Warning!
Before assembly, make sure that the tool
is switched off and unplug.
Use
Mounting The Nozzle For Blowing Operations
Insert the pin located inside the Nozzle into the notch provided on
the Blast Port. To lock Nozzle in place, turn the Nozzle in the direction
indicated. To remove Nozzle, turn the Nozzle in the opposite direction.
Mounting The Nozzle And Dust Bag For Dust Collection
For dust collection, mount the Dust Bag at the Blast Port and Nozzle
at the suction Port. To remove Dust Bag and Nozzle, simply pull out by
first turning in the opposite direction.
Empty the Dust Bag frequently to ensure maximum dust collecting
efficiency. Adjust Variable Speed Knob for different speed requirement.
When continuous operation is required, first depress the switch and
then the lock-on button and release to disengage lock, squeeze and
release switch.
Warning:
Continuous running of machine should not exceed 30
minutes.
Replacing Carbon Brushes
Use a screwdriver to remove the brush holder cap.
Take out the worn carbon brush, insert the new one and secure the
brush hold cap.
Warning:
Remove and check the carbon brushes regularly. Replace
when they wear down to the limit mark.
Accessories
The performance of your tool depends on the accessory used.
Manufacture accessories are engineered to high quality standards
and designed to enhance the performance of your tool. By using these
accessories you will get the very best from your tool.
Maintenance
Your tool has been designed to operate over a long period of time
with a minimum of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
Warning!
Before performing any maintenance, switch off and unplug the tool.
Regularly clean the ventilation slots in your tool using a soft brush or
dry cloth. Regularly clean the motor housing using a damp cloth.
Do not use any abrasive or solvent-based cleaner
Voltage
v
220-240V ~ 50/60Hz
Rated power
w
600
No load speed
min-1 6000-16000
Max blowing rate m
3
/min
3.5
Weight
Kg
1.6
Protection class
/ II
7
