The device picture here is only for reference.
Wiring
Setup
Linkage
APP
Connect the monitor to your NVR via the HDMI or VGA cable.
Connect NVR to the LAN interface of your router.
Connect the mouse to your NVR.
The HDMI cable and the VGA cable should be purchased seperately.
Connect the camera(s) to the PoE interface of your NVR via ethernet cable.
The camera can be linked to the NVR automatically once it is powered on by your NVR.
Download
Register
Add NVR
Network Video Recorder
Model: xxxxx
IP: xxxxx
SN: xxxxx
MM/YYYY
Verification Code:xxxxx
Grounding Terminal
Power on the NVR.
[For First Time Access]
When the Wizard interface appears on the monitor, follow the
Wizard and finish initial configuration.
Log in the NVR.
Please make sure that your NVR is electrically earthed.
Connect the power outlet to your NVR, and turn on the power button.
Add your NVR to EZVIZ APP.
(Optional)
Get and install EZVIZ app by searching “EZVIZ” in App Store or Google Play
TM
.
Launch the app and register an EZVIZ account.
Add NVR to your account by scanning the QR code on the bottom of the NVR.
Make sure you have connected the router to your NVR.
For more camera settings, you can refer to the camera Quick Start Guide to add
camera(s) to your EZVIZ account.
