5
•
Do not install the smart button on metal doors because metal will cause signal
attenuation. You can install it on walls beside metal doors.
•
It is recommended that the distance between the smart button and gateway be less than
20m. If there are walls between them, the number of walls should be no more than 2.
•
Before sticking the smart button, clean the dust on the surface first. Do not stick the smart
button on limewashed walls.
Operations on the EZVIZ App
The app interface may be different due to version update, and the interface of the app you
installed on your phone shall prevail.
1� Homepage
Launch the EZVIZ app, open the homepage of the related gateway, you can manage
your detector as needed on the page.
Log
Detection log of the detector.
2� Settings
Parameter
Description
Device Name
Customize the name of your device.
Emergency Button
When enabled, the device will switch to emergency call
mode and the original arm and disarm button will be
disabled.
Related Devices
You can see the gateway connected to your detector.
Device Information
You can see the device information here.
Share
Share your device.
Delete Device
Tap to delete the detector from EZVIZ cloud.