5
2� Install Micro SD Card (Optional)
-
Turn up the Cover on the camera.
-
Insert a Micro SD card (sold separately) into the card slot as shown in the figure below.
-
Place the cover back on.
Turn up the Cover
After installing the Micro SD card, you should initialize the card in the EZVIZ app before using it.
-
In the EZVIZ app, tap the
Record List
in the Device Settings interface to check the SD card status.
-
If the memory card status displays as
Uninitialized
, tap to initialize it.
The status will then change to
Normal
and it can store videos.
3� Installation Steps
1.
Please separate the mounting plate from the screw base first.
Mounting Plate
Screw Base
2.
Remove the protective film from the lens.
3.
Place drill template onto a clean and flat surface.
4. (For cement wall only) Drill screw holes according to the template, and insert anchors.
5.
Use screws to fix the mounting plate according to the template.
6. Rotate the screw base to the mounting plate.
7. Mount the camera to the base.
Mounting Plate
Anchor
Drill Template
Screw
Screw Base
Camera
