Note:
Both back receivers need to be lowered onto the to flat bars at
the same time and evenly to prevent binding.
Note:
Do not assemble the chair if the upholstery or any of the parts
of the chairs are damaged.
Check all parts carefully before assembling the chair. If any problem
is apparent contact the vendor.
Electrical Connections:
Note: Make sure all the wires
are properly connected to
ensure proper function.
(1). Connector for the motor
and wiring
(2). Connector for wiring
and adaptor
(3). Connector for adaptor
wiring and plug wiring
(4) Hand control connection
Chair Placement:
•
Allow sufficient space in front
of and behind the chair for
reclining purpose.
•
To allow for unimpeded reclining
make sure there is a minimum of
65 cm behind the chair.
•
Ensure there is at least 40cm
in front of the chair.
•
Place the chair on a flat
surface/floor in a dry room.
6