12. 720/1080
—When input video is 1920*1080, press this button to set the resolution of record video
between 720 and 1080, 720 LED on means record 720, 1080 LED on means record 1080. Before you
press this button to set recording video quality, 1080 green LED keeps on when input 1080 resolution
video or no video source input, and 720 green LED keeps on when input 720 or less than 720
resolution video.
13. ON/OFF
—Short press to power on, and MUTE green LED will turn on. Long press 3 seconds
again to power off, green LED will turn off. It
’s no effect during recording.
How to play:
1, Connect DC port with DC power adapter included package. MIC+- LED will turn red, then turn off
and turn on slowly. Short press ON/OFF button to power on.
2, Connect video source (e.g. Computer) to HDMI INPUT or VGA INPUT, the picture shows from VGA
video source, it will be the same if connect from HDMI.
3, Connect HDMI OUTPUT or VGA OUTPUT to Projector or monitor.
-You should connect HDMI OUTPUT to Projector or monitor if you connect video source to HDMI
INPUT, VGA OUTPUT port has no signal output at this moment.
4, Plug an USB flash drive or USB HDD into HOST port.