INSTRUCTION MANUAL
SWD® Starter Kit
Page
23
on
30
V-EN_20072022_SWD® Starter Kit
7.3.
Safety fields configuration
The default configuration of safety fields in the safety laser scanner is set as follows:
To edit and customize the safety fields, use the SLS Project Designer software.
Close obstacle
-
Area 70cm width x 1m forward
-
Routed to OSSD 3/4 outputs of safety
laser scanner
Collision risk
-
Area 50cm width x 50cm forward
-
Routed to OSSD 1/2 outputs of safety laser
scanner
Figure 7 - Safety fields of the safety laser scanner
