12ft Fiexible
LED color changing Strip Light
M
o
d
el
#:
EZSL1224CC0002
/
EZSL1224CC0002
EZSL1224CC0003
Remove the
fi
xture and moun
ti
ng package from the box and make sure that no parts
are missing by referencing the illustra
ti
on on the installa
ti
on instruc
ti
ons.
U
ser Manual
Congratulation
s
on
y
our
EZ LIGHTING
product
s
purchase
PLEA
S
E
READ
THE
S
E
IN
S
TRU
C
TION
S
BE
F
ORE
IN
S
TALLATION
LED
X1
X1
X1
X28
X12
X1
X1
SL
7
Auto
Flash
8
Trail
Spread
Meteor
Horse
race
White
EZSL1224CC0003
X1
X1
X2
X40
X18
X1
X1
SL
7
Auto
Flash
8
Trail
Spread
Meteor
Horse
race
White
2A. Remove the protective tape from the adhesive back of the LED strip carefully. Place the LED
strip into the desired location on a clean and dry surface, and press to ensure proper adhesion
to the surface.
1. Remove any surface dust from the area where you will be applying the LED strip.
2B. Place the LED strip in the desired location. Use the clips and screws to secure the LED
strip as shown. Clips should be placed in open areas of the strip, do not cover the LED chips.
A
3A
3B
B
correct
correct
correct
A
B
A
WW
Flash
C
≤15 m / 49.2 ft
°
360
Sensor efficiency distance ≤15 m / 49.2 ft and sensor efficiency angle about 360°.
3A. Remove the protective tape from the adhesive back of the RF receiver carefully, then place
the RF receiver into position and press to ensure a proper adhesion to the surface.
3B: Use the two screws to install the RF receiver into desired location.
In case of missing parts, please email [email protected] and we will send them out right away.
ASSEMBLY AND INSTALLATION
