Revision Number-000 6-2-2008 - Present
2
EZ Grout Corporation 1-800-417-9272 www.ezgrout.com
Loading Wire
1 Attach the
Fence Hog
Fence Hog
Fence Hog
Fence Hog
Fence Hog®
to your skid steer. Refer to skidsteers owner’s
manual for attachment procedure.
2 Connect hydraulic hoses to skid steer auxiliary hydraulic couplers. Manually
swing outriggers into open position and secure in place using latch pins.
3 Using the auxiliary hydraulics, cycle all hydraulic motions to verify the
Fence Hog
Fence Hog
Fence Hog
Fence Hog
Fence Hog®
is operating correctly. Verify that the cage opens and closes
completely and moves smoothly throughout its travel of operation.
Note: If Skidsteer is equipped with variable flow hydraulics, operate on Max.
Flow.
4 Open the
Fence Hog
Fence Hog
Fence Hog
Fence Hog
Fence Hog®
to its widest point and position your skid steer so
that a roll of fence or fabric is directly in front of it.
5 Lift the boom and tilt the
Fence Hog
Fence Hog
Fence Hog
Fence Hog
Fence Hog®
down.
6 Move the skid steer forward until the turntable of the
Fence Hog
Fence Hog
Fence Hog
Fence Hog
Fence Hog®
aligns
with the bottom of the roll of fence.
7 Lower the
Fence Hog
Fence Hog
Fence Hog
Fence Hog
Fence Hog®
over the roll of fence and begin closing the gates.
Once the gates are mostly closed, lift the boom and tilt the
Fence Hog
Fence Hog
Fence Hog
Fence Hog
Fence Hog®
up.
8 The roll of fence will fall back into the cage of the
Fence Hog
Fence Hog
Fence Hog
Fence Hog
Fence Hog®
. Close the
Fence Hog
Fence Hog
Fence Hog
Fence Hog
Fence Hog®
tightly.
Note:
For Woven Wire
-
To hold roll upright, Install Optional Roll Centering Rod
through the center of roll and into turntable, by first removing the Roll
Centering Rod from the square tube on the back of the
Fence Hog
Fence Hog
Fence Hog
Fence Hog
Fence Hog®
and then sliding it through the center of fence roll and into the hole in the
turntable. Then, install Centering Rod support over Centering Rod.
Installing Fence
1 After loading a roll of wire, move the skid steer parallel to the row of fence posts
and attach the beginning of the roll to the first fence post.
2 Slowly drive the skid steer along the fence line and the roll will start to unwind.
Continue to desired stretching point.
Standard Chain Link Stretcher:
At stretching point, remove latch pin and rotate
Stretching Bar until fingers point outward. Insert fingers through the fence. Skip
to Step 3.
Optional Woven Wire Stretcher: At stretching point, remove latch pin and rotate
Stretching Bar outward. Align fence with stretcher. Using the holes provided,
drive the locking wedges into stretcher to hold fence.
3 Maneuver the skid steer so the fabric is aligned with the fence line.
HOLD
CLOSE PRESSURE ON GATE
and drive skidsteer to stretch to desired
tension.
4 Attach fence to post.
5 Relieve pressure on fence
(remove locking wedges if applicable)
and return
stretcher to stowed position.
6 Repeat steps 1 through 5 as needed.
Operating Instructions
Pinch Label: Located on gates where gates
attach to frame and where gates come
together.
Warning Labels
1) Pinch point. Keep hands clear.
2) Stay clear of moving parts while
machine is in operation.
3) Keep all body parts, solid objects,
clothing, and jewelry away from
moving parts and hinges.
WARNING!
!
Before using this
equipment, study entire
Owner’s Manuals.
Owners Manual: Located on frame.
