12.8 HDD Setup
12.8.1
Load and Copy
There are three (3) options in this function: OFF, Synchronous, and Load First.
OFF
: Disables the load and copy function. No temporary image is loaded to
the HDD during the copy process.
Load First
: Completes loading of the image to the HDD then automatically
starts the copy process from the image stored on the HDD to all target disc(s).
Image is loaded one at a time and copied to the Writer Drives with blank
disc(s). The image is stored in a [TEMP] partition on the HDD.
Synchronous
: Loads the image at the same time while the duplicator is
making copies from the source disc to the blank discs. As the copies being
made, the image is also being created and stored on the HDD.
Press ▲▼ to
select setting
12.8.2
Failed Image
This command will
delete
or
reserve
the failed image.
Press ▲▼ to
select setting
12.8.3
Default Image
Select the default image from the HDD.
Available options: Selected Image, First Image and Latest Image.
Press ▲▼ to
select setting
[ HDD Setup ]
1. Load and Copy
[ Load and Copy ]
OFF
ENT
ENT
[ HDD Manager ]
8. HDD Setup
[ HDD Setup ]
2. Failed Image
[ Failed Image ]
Delete
ENT
ENT
[ HDD Manager ]
8. HDD Setup
[ HDD Setup ]
3. Default Image
[ Default Image ]
Selected Image
ENT
ENT
[ HDD Manager ]
8. HDD Setup
23
