- 9 -
FIG. 7
3.5. Make sure the stair assembly is positioned flush against the platform side rail and use the holes in
the stair hanger tabs as a template to drill
1/8” hole
s through the top wall of the side rail. Fasten
the stair assembly to platform using two provided 1/4" pan head self-tapping screws (FIG. 8).
NOTE: If the stair will be used with a Connector
–
HR Platform to Stair (MHRPSC), a minimum of
6” is required between the platform vertical post and stair top post.
FIG. 8
3.6. Insert the stair bottom posts in bottom corner pockets with the holes on top (FIG. 9). DO NOT
tighten set screws yet.
Summary of Contents for Pathway Stair System
Page 12: ...12 FIG 12 FIG 13...