Document Nr.:
Version:
1.Vers. from date:
1.Version from:
Modified from:
Modified at:
Page Nr.
OSH-Manual-EN
1.3
28.02.2012
A. Schutz
A. Schutz
11.05.2012
4 von 33
2. Stacking the omniSHAPE
Before starting to build a wall you have to loosen the screws in the corners.
If this isn’t done,
the accuracy of the screens flatness won’t be very good.
To build a tower of some omniSHAPES you have to put the first omniSHAPE on a stable
ground. Optional you can use the omniSHAPE Basements.
Make sure that the ground or the basement is in water level.
