Document Nr.:
Version:
1.Vers. from date:
1.Version from:
Modified from:
Modified at:
Page Nr.
OSH-Manual-EN
1.3
28.02.2012
A. Schutz
A. Schutz
11.05.2012
27 von
33
9. Saving of the Adjustment
To save the adjustment you have to mark the omniSHAPES of which you want to save the
configuration.
Therefor you have to mark them. After they’re marked the color switches from
black to purple as seen in the pictures below:
Then press
File
->
Save Adjustment as…
as seen below.
Then choose a filename and save it to the directory you want.
It could be that the omniSHAPE wall looks misaligned after you did some adjustments. Now you
can load the saved adjustment.
Choose the omniSHAPE on which you want to load the saved adjustment, then press
File
->
Load Adjustment…
as seen below.
Notice: The adjustment will only be
loaded onto the selected Shapes.
Multiple selections are possible.
Choose the file in which you saved the adjustment, press
open
and the adjustment is reloaded
again on the unit you have chosen.
Then press the save button
to save the adjustment.
