Document Nr.:
Version:
1.Vers. from date:
1.Version from:
Modified from:
Modified at:
Page Nr.
OSH-Manual-EN
1.3
28.02.2012
A. Schutz
A. Schutz
11.05.2012
20 von
33
7.5. Mapping
To add a source, press “
+
” after choosing the resolution.
Now you can move the Source over the omniSHAPE in any position you want to have.
By pressing the
Apply Mapping
button, the pictures on the chosen omniSHAPE will be
mapped.
To undo the mapping, press
Mapping Off
, and the mapping will be recessed you find the
button in the geometry settings. To get there press the button
on the left.
