CXL-365 vario
corneal cross-linking
1025_IFU_507536 CXL-365 vario_EN_Rev 09
Page 39 of 49
6
Installation, Maintenance, Trouble shooting, Disposal
6.1
Cleaning and maintenance
Avoid direct contact with the beam exit optics. Keep measurement adapter attached
while cleaning, storage etc. The adapter protects the optics.
Do not flush the device with cleaning liquids to avoid damage from penetration of the
liquid into the device
Do not use aggressive cleaning agents like acetone. Instead use solvent-free alcoholic
Fast-Disinfectant like Bacillol.
Wipe disinfection should be performed regularly. Use abrasion resistant cloth, moisten is with a
disinfectant like Bacillol and wipe the surface gently.
6.2
Calibration of the ME equipment
To ensure that the equipment over its useful life always meets the basic safety and essential
performances, the equipment must be calibrated once a year. The date of the next calibration is
determined on the UV meter by the label depicted in Figure 8. Do not use the equipment with
expired calibration. For the purpose of calibration please contact your distributor.
The UV lamp and the UV - meter to control the illuminatison intensity are aligned to each other and
cannot be operated independently of each other. In case of defects please contact your distributor.
Do not separate UV
–
meter from UV lamp!
