Eyecon 9420 & 9430 Instruction Manual
73
3.15 Inventory menu
3.15.2 Inventory Server IP Address:
Enter the IP address where the inventory should be sent.
3.15.3 Inventory Server Port Number:
Enter the Port number where the inventory should be sent.
3.15.4 Inventory Server Connect Timeout:
Enter the amount of time in milliseconds that the system will try to connect. The default
value is 5000 milliseconds.
3.15.5 Inventory Server Response Timeout:
Enter the amount of time in milliseconds that the system will try to connect. The default
value is 3000 milliseconds.
3.15.6 Display Quantity on Hand (QOH):
Choose one of the following options for QOH.
• Disabled
- No QOH from the Inventory Interface Provider will be recorded or
displayed.
• Query Only
- The QOH from the Inventory Interface Provider will be recorded but
will not be displayed as a target.
• Query and Display
- The QOH from the Inventory Interface Provider will be
recorded and will be displayed as the count target.
3.15.7 Store Number:
Enter a store number if part of a chain of stores.
Eyecon Native
- If your Inventory Interface Provider has indicated that they work with
Eyecon but is not listed above, choose
Eyecon Native
to use the native Eyecon
interface to query and send inventory counts back and forth with the pharmacy
system.
When you select a provider, the following additional menu items appear in the
Inventory
Menu: