manualshive.com logo in svg

Eyecon 9420, Instruction Manual, Page: 69 / 146

Share
Download
Eyecon 9420 Instruction Manual Download Page 69

Eyecon 9420 & 9430 Instruction Manual

69

3.14    Backup / Restore menu

• USB

 - This is the default location. Be sure to use a USB memory device with enough 

space for your backup needs. 8 GB should be sufficient for most Eyecon users but a 

16 GB drive may be needed if your Eyecon database is nearing a full state. Check your 

database size in the 

About

 menu described in section 3.2.1.

• External - This option allows the backup and restore operations in this menu to use 

network location. Consult with your IT department for help in setting this up as a user 

name, password, and domain may be necessary.

• Internal

 - This option will use the Eyecon’s hard drive as the backup/restore location.

3.14.2 Backup Interval:

This defines the time in hours that the Eyecon will perform an auto-backup of its own 

database to the selected backup location. The default setting of 0 disables automatic 

backups. Configuration Files are not included in this backup process but can be backed 

up independently as necessary.

3.14.3 Backup All:

Backup All

 - Select this, to back up the entire Eyecon database to the selected Backup 

Location above. 

3.14.4 Restore All:

Select this to restore the entire Eyecon database, including Configuration Files from the 

selected Backup Location above. 

Backup All 

must have been performed at some point 

before choosing 

Restore All

.

3.14.5 Backup Database:

Select this, to back up the Eyecon database to the selected Backup Location above. 

Configuration Files are not included in the process. 

3.14.6 Restore Database:

Select this to restore the Eyecon database from the selected Backup Location above. 

The time required to complete various backups is affected by the amount of data on 

the eyecon as well as the speed rating of your USB drive or if an external path is 

specified, the speed and other activity on the network connection. Database backups 

can take up to 30 minutes longer, based on the above factors. 

Summary of Contents for 9420



















































































































































Reviews:

No comments