50
Eyecon 9420 & 9430 Instruction Manual
Settings menu
3.6.5 PMSS Data Purge Time (In Days):
Tap
PMSS Data Purge Time (In Days):
to see the numeric keypad. Use this to set the
number of days in which PMSS data will purge. The default period is 120 days which
is also the maximum.
Press
OK
to accept the entry.
The PMSS data sent by the pharmacy system to the Eyecon is held in a table. Every
day, the table is purged of any entries older than the chosen value. This table is also
used to determine if a prior partial or complete fill has been preformed. Ensure that you
maintain the data as long as you feel this is needed for your operations. The default
value is 120 days.
3.6.6 Send Integer Quantity Only
By default, the Eyecon could send a fractional value, as appropriate for some unit-of-
use items, to the PMSS system in the bidirectional packet (count results packet). If
Send Integer Quantity Only
is enabled, the Eyecon will truncate any fractional value
and send the resulting integer value. This is ideal for a PMSS system that is not capable
of processing fractional count values that can occur for unit of use items.
3.6.7 Clear PMSS Data
Tap
Clear PMSS Data
and the warning screen at
right is displayed.
• Press
YES
to delete all of the PMSS
Rx transactions from the Eyecon.
This can be used if the Eyecon is
being moved to a new site or the
database were to be corrupted.
Screen returns to the
Pharm. Mgmt.
menu.
• Press
NO
to decline. Screen returns to the
Pharm. Mgmt.
menu.
3.6.8 Interface Override of Stock Item Verification
This parameter will allow the incoming PMSS pocket to override the general menu
Stock Item Verification parameter. When disabled, the Stock item verification setting on
the General menu will be used, even if the PMSS system specifies a different value in
the incoming communication to the Eyecon.