Operating Manual
8
3 Installation and Setting-to-Work
3.1 Installation
The iWAP200 is simple to install and can be secured directly to suitable surface
using the mounting holes on the Enclosure.
3.1.1
Removing the cover
Unscrew the four screws and remove the enclosure lid.
See table below for antenna connections:
Antenna
Connection
Number of N-type connectors
ordered for Radio 1
(2.4GHz Default)
0
1
2
3
R1-A
x
✓
✓
✓
R1-B
x
x
✓
✓
R1-C
x
x
x
✓
Note: For Radio 1 (R1) and Radio 2 (R2) on any manufacturers Wireless Access
point, A will be antenna port 1, B will be antenna port 2, and C will be antenna port 3.
For example:
If you have ordered 1 N-type connector for Radio 1, and 2 N-type connectors for
Radio 2. Then R1-A will be connected to antenna port 1 of Radio 1, R2-A will be
connected to antenna port 1 of Radio 2, and R2-B will be connected to antenna port
2 of Radio 2 for any manufacturers wireless access point.
Antenna
Connection
Number of N-type connectors
ordered for Radio 2
(5GHz Default)
0
1
2
3
R2-A
x
✓
✓
✓
R2-B
x
x
✓
✓
R2-C
x
x
x
✓
Lid
screws
Lid
screws
Ethernet /Fibre
Cable Entry
AC/DC Power
Cable Entry
R1-C
R1-B
R1-A
R2-C
R2-B
R2-A
