extronics iWAP XN3 X2000, Installation And Operating Manual

Page: 18 / 29

XN3 Installation and Operating Manual
18
3.9.3 Optical Fibre
The XN3 optical fibre format, Table 3, may be any of the following, refer to product
option code #5 for details. Other optical formats are available on request.
MF 1000Bas
e-LX
LC Duplex
Multimode
-3 to -9.5dBm
(62/125µm)
-1 to - 9dBm
(50/125µm)
-19dBm -1dBm 1310nm 550m
SF 1000Bas
e-LX
LC Duplex Single -3 to -9.5dBm -20dBm -3dBm 1310nm 10km
Table 3: Fibre Formats
3.9.4 Console Port
There are two types of console port connectors that can be specified as below.
Only one type is possible on the same unit.
3.9.4.1 RJ45
The console port is a standard Cisco RS232 configuration port on an RJ45 socket.
The port for Cisco Access Points is 9600 baud, 8 data bits, no parity, 1 stop bit,
Table 4. Other vendors may use different formats.
3.9.4.2 Mini USB
Pin Function
1 RTS
2 DTR
3 TXD
4 GND
5 GND
6 RXD
7 DSR
8 CTS
Pin Function
1 Vcc
2 D-
3 D+
4 ID
5 GND
Table 4: Cisco console port wiring