Extron electronics XTP T USW 103, User Manual

Page: 27 / 46

XTP T USW 103 Switcher • SIS Configuration and Control 19
Command and Response Tables for SIS Commands
Command ASCII Command
(Host to Device)
Response
(Device to Host)
Additional Description
Input Commands
Input selection
Select input X!
! In
X!]
Select input
X!
.
View the selected input
!
In
X!] View the selected input.
Auto switch mode
Disable auto switch mode
E
0AUSW
}
Ausw0
]
Switch inputs manually (default).
Set priority to the highest
numbered active input E
1AUSW
}
Ausw1
] Automatically switch to the highest
numbered active input.
Set priority to the lowest
numbered active input
E
2AUSW
}
Ausw2
]
Automatically switch to the lowest
numbered active input.
View setting E
AUSW
}
Ausw
X*] View the auto switch mode.
Audio Configuration Commands
Audio gain and attenuation
NOTE: Gain and attenuation commands are case-sensitive.
Set gain X%
G Aud
X&]
Set gain to
X%
.
Set attenuation X^
g Aud
X&]
Set attenuation to
X^
.
Increment audio level
+G
or
+g
Aud
X&] Increase the audio level by 1 dB.
Decrement audio level
-G
or
-g
Aud
X&] Decrease the audio level by 1 dB.
View audio level
G
or
g
Aud
X&] View the audio level.
Audio input selection
Set audio input format E
I
X#
AFMT
}
AfmtI
X#]
Set the audio input format to
X#
.
View audio input format E
IAFMT
}
AfmtI
X#] View the audio input format.
Black video signal resolution
Set black video signal
resolution E
A
X2#
AFMT
}
AfmtA
X2#] Set the black video signal resolution
to
X2#
.
View black video signal
resolution
E
AAFMT
}
AfmtA
X2#]
View the black video signal
resolution.
NOTES:
X!
= Input selection
1
= VGA (input 1)
2
= HDMI (input 2)
3
= HDMI (input 3)
X#
= Audio input format
0
= auto, prioritize digital audio (default)
1
= digital embedded
2
= analog
X%
= Audio gain
0
to
24
in 1 dB increments (
0
= default)
X^
= Audio attenuation
-18
to
0
in 1 dB increments (
0
= default)
X&
= Audio level
-18
to
24
in 1 dB increments (
0
= default)
X*
= Auto switch mode 0
= disable (default)
1
= priority to the highest numbered active input
2
= priority to the lowest numbered active input
X&
= Black video signal resolution
2
= 720p @ 50 Hz
4
= 720p @ 60 Hz (default)
6
= 1080p @ 60 Hz