XTP T HWP 101 4K Wallplate Transmitter • Introduction
2
System Compatibility
The XTP T HWP 101 4K is compatible with XTP Systems, but the maximum video resolution
may be limited with different twisted pair models. See the table below for maximum video
resolutions and refresh rates for various inputs and outputs.
Maximum Resolution and Refresh Rates for XTP Systems
Output
Non-4K
4K Fiber
4K Twisted
Pair
4K PLUS
Input
Analog
1920x1200
@ 60 Hz
1920x1200
@ 60 Hz
1920x1200
@ 60 Hz
1920x1200
@ 60 Hz
Non-4K Digital
2048x1080
@ 60 Hz
2048x1080
@ 60 Hz
2048x1080
@ 60 Hz
2048x1080
@ 60 Hz
4K Fiber
2048x1080
@ 60 Hz
4096x2160
@ 24 Hz
4096x2160
@ 24 Hz
4096x2160
@ 24 Hz
4K Twisted Pair
2048x1080
@ 60 Hz
4096x2160
@ 24 Hz
4096x2160
@ 30 Hz
4096x2160
@ 30 Hz
4K PLUS
2048x1080
@ 60 Hz
4096x2160
@ 24 Hz
4096x2160
@ 30 Hz
4096x2160
@ 60 Hz
Control Methods
To directly control the XTP T HWP 101 4K, use one of the following methods:
•
Simple Instruction Set (SIS) commands (see
on
page 18)
•
XTP System Configuration Software (see
on page 23)
Certain features can also be controlled through an XTP matrix switcher (see the XTP matrix
switcher user guide at
).
NOTE:
If the XTP T HWP 101 4K is connected to an XTP matrix switcher, configure
it through the XTP matrix switcher (see the XTP matrix switcher user guide for SIS
commands or the XTP System Configuration Help File for software details).
Features
XTP Interconnection Features
•
Reliable cable infrastructure
— Transmits or receives video, audio, bidirectional
RS-232 and IR, and Ethernet over a shielded twisted pair cable to provide high reliability
and maximum performance on an economical and easily installed cable infrastructure.
•
Shielded twisted pair cable compatibility
— Supports a maximum transmission
distance of 330 feet (100 meters) for all compatible resolutions when used with shielded
twisted pair cable. Shielded twisted pair cabling with solid center conductor sizes of
24 AWG or better is recommended for optimal performance.
•
Remote power capability
— Allows for simplified integration of XTP twisted pair
transmitters and receivers. They can be powered by an XTP matrix switcher or another
XTP device with an Extron power injector.
•
RJ-45 signal and link status LED indicators for XTP ports
— Provide a means
for validating signal flow and operation from transmitter to receiver, allowing quick
identification of connectivity issues.
Summary of Contents for XTP T HWP 101 4K
Page 6: ......
Page 8: ...XTP T HWP 101 4K Wallplate Transmitter Contents viii ...
