XMP 240 C AT • Configuration Tools
85
Serial Settings
The
Serial Settings
tab allows users to change the baud rate of the rear panel RS-232
port. Click
Apply
to save the changes.
NOTE:
The recommended baud rate for the XMP 240 C AT is 38400.
Figure 116.
Serial Settings Tab
Date/Time
Figure 117.
Date/Time Tab
To set the date and time:
1.
Click the
Set Local
button to sync the date and time information with the date and time
on the connected PC.
2.
Set the time zone by using the
Zone
drop-down.
3.
Use the
Daylight Savings
radio buttons to enter the daylight saving region, or leave off
(default).
-or-
1.
Click on the
Set Date and Time
check box.
2.
Enter the desired date in the
Date
field. A drop-down calendar is available for date
selection.
3.
Enter the desired time in the
Time
field by clicking on the hours and entering the hour,
