Extron electronics XMP 240 C AT User Manual Download Page 52

Page: 52 / 139

XMP 240 C AT • DSP Configurator Software

Fixed Filters Tab

Figure 71.

Feedback Suppressor Dialog Box - Fixed Filters Tab

Fixed Filters Tab

— Provides access to fixed filter configuration options.

Fixed Filters List

— Displays up to 5 fixed feedback suppression filters.

Filter Parameters

— Configure the

Frequency

Boost/Cut

, and

parameters for each

fixed filter using the text boxes.

Single Filter Bypass Button

— Bypasses only the filter associated with that filter slot.

When the button is red, the filter is bypassed.

Clear All Button

— Clears all fixed filters from the list.

Bypass FBS Button

— Bypasses the FBS processor. When the button is red, FBS is

bypassed.

Set Defaults Button

— Resets parameters on all tabs to their default values and

positions.

OK Button

— Confirms changes made to the contained parameters and closes the

Feedback Suppressor

dialog box.

Cancel Button

— Reverts any changes made to the contained parameters back to

their states when the current instance of the

Feedback Suppressor

dialog box was

opened and closes the dialog box.

Feedback Suppressor Help Button

— Opens the

Feedback Suppressor

topic of the

DSP Configurator Help

file for further assistance in understanding and operating the

feedback suppression processor.

Fixed Filters Tab

Fixed Filters List

Filter Parameters

Single Filter Bypass Button

Clear All Button

Bypass FBS Button

Set Defaults Button

OK Button

Cancel Button

Feedback Suppressor Help Button

figure 44. Feedback Suppressor Dialog Box - Fixed Filters Tab

Summary of Contents for XMP 240 C AT












































































































































Search results

Summary of Contents for XMP 240 C AT

Reviews:

Related manuals for XMP 240 C AT

Brands by name

Popular brands

Extron electronics XMP 240 C AT, User Manual

Search results

Summary of Contents for XMP 240 C AT

Reviews:

Related manuals for XMP 240 C AT

Brands by name

Popular brands