Extron electronics XMP 240 C AT User Manual Download Page 51

Page: 51 / 139

XMP 240 C AT • DSP Configurator Software

Dynamic Filters Tab

Figure 70.

Feedback Suppressor Dialog Box - Dynamic Filters Tab

Dynamic Filters Tab

— Provides access to dynamic filter configuration options.

Dynamic Filters List

— Displays a list of 15 dynamic feedback suppression filters.

As feedback is detected on the virtual return channel, dynamic filters are applied to
suppress feedback with the

parameter defined in the

Settings

tab.

Move to Fixed Button

— Transfers the dynamic filter along with its current parameters

to the

Fixed Filters

tab, allowing parameters to be edited. This frees up a filter slot in

the

Dynamic Filters

list.

Clear Button

— Clears the dynamic filter and contained parameters.

Clear All Button

— Clears all dynamic filters and resets the feedback detection and

suppression process.

Lock Button

— Locks current dynamic filters and prevents more dynamic filters from

being applied.

Bypass FBS Button

— Bypasses the FBS processor. When the button is red, FBS is

bypassed.

Set Defaults Button

— Resets parameters on all tabs to their default values and

positions.

OK Button

— Confirms changes made to the contained parameters and closes the

Feedback Suppressor

dialog box.

Cancel Button

— Reverts any changes made to the contained parameters back to

their states when the current instance of the

Feedback Suppressor

dialog box was

opened and closes the dialog box.

Dynamic Filters Tab

Dynamic Filters List

Move to Fixed Button

Clear Button

Clear All Button

Lock Button

Bypass FBS

Set Defaults Button

OK Button

Cancel Button

figure 43. Feedback Suppressor Dialog Box - Dynamic Filters Tab

Summary of Contents for XMP 240 C AT












































































































































Search results

Summary of Contents for XMP 240 C AT

Reviews:

Related manuals for XMP 240 C AT

Brands by name

Popular brands

Extron electronics XMP 240 C AT, User Manual

Search results

Summary of Contents for XMP 240 C AT

Reviews:

Related manuals for XMP 240 C AT

Brands by name

Popular brands