Extron electronics VNM EC 200, User Manual, Page: 94 / 242

Configure Menu
Click Configure (see figure 61 on page 82) to open the Configure Device
Settings dialog box (see figure 64) used to change the device name or to configure up
to three user parameters for the recorder. The dialog box is the same for the VNM Recorder
and the VNR 100.
1
2
3
Figure 64. Recorder Configure Dialog Box
Device Setup Panel
1
Device Name — Enter a user defined name for the VN-Matrix Recorder. This is the
name that appears in the device list. The name can be letters, numbers, and the
underscore character. Spaces are not allowed.
2
User Parameters — Up to three user parameters can be entered in these three fields
to customize the operation of the recorder (see Device Setup panel on page 68).
Networking Panel
3
Multicast TTL — Specifies the number of router hops multicast traffic can make
between routed domains.
VNM EC 200 • Device Configuration and Control 84