manualshive.com logo in svg

Extron electronics VNM EC 200, User Manual, Page: 37 / 242

Share
Download
Extron electronics VNM EC 200 User Manual Download Page 37

Upgrade Page

The 

Upgrade

 page is used to update the firmware of the VNM EC 200.

• 

For information on updating the firmware of a single VNM EC 200, see 

Updating the 

Firmware of a Single EC 200

 on page 184.

• 

For information on updating the firmware of dual (redundant) VNM EC 200s, see 

Updating the Firmware of Dual (Redundant) EC 200s

 on page 184.

Version Page

The 

Version

 page (see figure 19) details the versions of firmware running on various 

components of the VN-Matrix system.

1

1

2

2

3

3

4

4

5

5

6

6

Figure 19. 

Version Page

The following fields are read-only (cannot be edited).

1

  enterprise controller 

— This field displays the version of software that is running on 

the VNM EC 200.

2

  matrix controller 

— This field displays the version of firmware that is running on the 

VNM EC 200.

3

 heartbeat 

— This field displays the Heartbeat clustering software version that is 

running on the VNM EC 200. The Heartbeat and Pacemaker software work together to 
create a cluster.

4

 pacemaker 

— This field displays the Pacemaker clustering software version that is 

running on the VNM EC 200. The Heartbeat and Pacemaker software work together to 
create a cluster.

5

 drbd 

— This field displays the Distributed Redundant Block Device (DRBD

®

) version 

that is running on the VNM EC 200. DRBD is used to manage and sync a cluster of 
VNM EC 200s.

6

  linux kernel 

— This field displays the version of Linux that is running on the  

VNM EC 200.

 

VNM EC 200 • Advanced Controller Configuration

27

Summary of Contents for VNM EC 200



















































































































































































































































Reviews:

No comments