Extron electronics VNM EC 200, User Manual, Page: 232 / 242

presetplay
The
presetplay
command controls the playback speed of all currently playing player
devices (VNM Recorder and VNR 100) within a preset. If
presetplay
is called while the
players in a preset are paused, playback is resumed at the specified speed.
NOTE:
presetplay
cannot be used to start players currently stopped. The
presetplayerstart
command is used in this instance.
Command line structure
presetplay name speed
Available parameters and arguments for this command:
Parameter Argument Description
name string
Example: preset1
The name of the stored preset.
speed -10.0 to 10.0 Playback speed where -10.0 to 10.0 is a
multiple of 1x play speed (negative values
are reverse playback).
Example 1 - Setting the players in
preset1
to play at x1.5 speed forward.
presetplay preset1 1.5
]
Example 2 - Setting the players in
preset1
to play at x2.3 speed in reverse.
presetplay preset1 -2.3
]
Example 3 - Setting the players in
preset1
to play at x0.0 speed (pause).
presetplay preset1 0
]
presetplayerpause
The
presetplayerpause
command pauses playback on all active players in a specified
preset.
Command line structure
presetplayerpause name
name:
Name of the stored preset.
Example 1 - Pause all active playback in
"preset1"
.
presetplayerpause preset1
]
presetplayerstart
The
presetplayerstart
command activates playback on all provisioned players in a
specified preset. The optional
keepoffset
parameter determines whether a start and stop
offset (specified in the preset) is applied.
Command line structure
presetplayerstart name keepoffset
name:
Name of the stored preset.
Available parameters and arguments for this command are:
Parameter Argument Description
keepoffset yes or no
Example:
keepoffset=yes
Applies start, stop, or both offsets specified
in a preset.
VNM EC 200 • Reference Information 222