Extron electronics VNM EC 200, User Manual, Page: 225 / 242

delete (VNM Recorder and VNR 100 devices only)
The
delete
command deletes recordings on a recodring device.
Available parameters and arguments for this command are:
Parameter Argument Description
device 50001
192.168.0.51
VN_Recorder
The serial number (ID) of the recorder.
The IP address of the recorder.
The user-defined name of the recorder.
path String The path of the recording to be deleted.
For the following examples:
VNR 100: Name = 100_Device1 , ID = 10001 , IP = 192.168.0.11
VNM Recorder: Name = 5ch_Device1 , ID = 50001 , IP = 192.168.0.51
Example 1 - Delete the root folder and all recorded content from a folder on a VNR 100.
delete 10001 / Delete_Test
Returns:
okay
Example 2 - Delete the recording from a folder on a VNR 100.
delete 100_Device1 /Device_Test/
Delete_Test_Record_2001346.0.0_r0_s0.rec
Returns:
okay
Example 3 - Delete the root folder and all recorded content from a folder on a
VNM Recorder.
delete 192.168.0.51 /Delete_Test
Returns:
okay
Example 4 - Delete the recording made on Channel 2 from a folder on a VNM Recorder.
delete 5ch_Device1 /Delete_Test/
Delete_Test_Record_2001346.0.0_r6_s0.rec
Returns:
okay
NOTE: When deleting a single file, the full file name must be specified. The full file name
can be found by using the getFilesInFolder command (see page 207).
VNM EC 200 • Reference Information 215