manualshive.com logo in svg

Extron electronics VNM EC 200, User Manual, Page: 212 / 242

Share
Download
Extron electronics VNM EC 200 User Manual Download Page 212

createdisplay

The 

createdisplay

 command sets a VN-Matrix Codec device to display mode 

(decoder). It disconnects existing connections before changing the device mode.

Command line structure

createdisplay

 device

device:

  Device name, device ID, or IP address.

For the following examples:

VNM 2xx: 

 Name = 

200_Device1

, ID = 

20001

, IP = 

192.168.0.21

VNM 3xx:

  Name = 

300_Device2

, ID = 

30001

, IP = 

192.168.0.31

Example 1 - Set a VNM 2xx device to display mode using the IP address.

createdisplay

 

192.168.0.21

 

]

Example 2 - Set a VNM 2xx device to display mode using the device name.

createdisplay

 

200_Device1

 

]

Example 3 - Set a VNM 3xx device to display mode using the device ID.

createdisplay

 

30001

 

]

createsource

The 

createsource

 command sets a VN-Matrix Codec device to source mode (encoder). 

It disconnects existing connections before changing the device mode.

Command line structure

createsource

 device

device:

 Device name, device ID, or IP address.

For the following examples:

VNM 2xx:

  Name = 

200_Device1

, ID = 

20001

, IP = 

192.168.0.21

VNM 3xx:

  Name = 

300_Device2

, ID = 

30001

, IP = 

192.168.0.31

Example 1 - Set a VNM 2xx device to source mode using the IP address.

createsource

 

192.168.0.21

 

]

Example 2 - Set a VNM 2xx device to source mode using the device name.

createsource

 

200_Device1

 

]

Example 3 - Set a VNM 3xx device to source mode using the device ID.

createsource

 

30001

 

]

 

VNM EC 200 • Reference Information

202

Summary of Contents for VNM EC 200



















































































































































































































































Reviews:

No comments