1
IMPO
RTAN
T:
IMPO
RTAN
T:
Go to www
.extron.com f
or the complete
user guide
, installation instructions,
and
specifications bef
ore connecting the
product to the po
wer sour
ce.
USB-C HD 101 • Setup Guide
The Extron USB-C HD 101 provides connectivity between USB-C equipped sources and HDMI sink devices. Follow these
instructions to install the USB-C HD 101.
1.
Find a location to mount the product. Use the included ZipClip 200
®
mounting bracket and caddy if needed.
2.
Connect input and output cables to the product. Use the included LockIt
®
lacing brackets to secure the cables in place to
the product.
3.
Apply power to the product.
LED Indicators and Rear Cabling
USB-C HD 101
Front
Rear
USB-C HD 101
USB-C TO INTERFACE
SIGNAL
IN
OUT
USB-C HD 101
HDMI
USB-C
60W
50/60 Hz 1.4A MAX
100-240VAC
D
D
E
E F
F
B
B
C
C
A
A
Figure 1.
USB-C HD 101 - LED Indicators
USB-C HD 101
Front
Rear
USB-C HD 101
USB-C TO INTERFACE
SIGNAL
IN
OUT
USB-C HD 101
HDMI
USB-C
60W
50/60 Hz 1.4A MAX
100-240VAC
D
D
E
E F
F
B
B
C
C
A
A
Figure 2.
USB-C HD 101 - Rear Panel Ports
A
Power LED
—
Indicates power to the unit.
B
Power Delivery LED
— Indicates power delivery from the USB-C input (
E
) to the USB-C source device.
C
SIGNAL LED
—
Indicates signal detection from the USB-C input.
D
AC Power Input
— Connect the AC Power Cord to the AC Power input port.
E
USB-C input
−
Connect a USB-C source to the USB-C input.
NOTE:
The USB-C port provides up to 60W of power to a connected source device. Some USB-C sources may not be
able to be powered via USB-C. Check the specific source specification or manual for more information. If the source
requires greater than 60W of power, the source may still be able to be powered, may not power, or charge slowly.
F
HDMI output
−
Connect an HDMI output device to the HDMI output.