background image

Mounting With a UL-listed Electrical Box

The UL-listed electrical junction box must be purchased separately.

NO

RTH

AMERIC

A

NO

RT

H

AMERIC

A

Wall

TLP Pro 300M

Metal

Mounting

Plate

Electrical

Junction

Box

#6-32 x ¾"

pan-head screws

Figure 25. 

Mounting the TLP Pro 300M to a UL-listed Electrical Box

1. 

Cut a hole for the junction box at the required location. 

2. 

If you are using the provided tether kit to deter theft, one loop of the tether kit should be 
secured to a wall stud with a screw (not provided)

3. 

Run cables to the installation site as required.

4. 

Pass the other end of the tether kit and the cables through a knock-out in the junction 
box.

5. 

Install the junction box by following the instructions provided by the manufacturer.

6. 

Secure the metal mounting plate to the junction box, using the #6-32 x ¾" pan-head 
screws. Both the mounting plate and the screws are provided.

7. 

Attach cables to the back of the TLP Pro 300M (see 

TLP Pro 300M Rear Panel 

Features

 on page 6).

8. 

If a tether kit is being used, loosen the security screw  on the back panel (see 

figure 3

F

, on page 6) just enough to insert the loop of the tether kit.

9. 

Tighten the screw to clamp the tether in place.

10. 

Attach the touchpanel to the metal mounting plate. The touchpanel is held in place by 
magnets.

 

TLP Pro 300M • Mounting

26

Summary of Contents for TouchLink TLP Pro 520M









































Reviews: