Using the TouchLink Panel Web Pages
The TLP 350CV TouchLink panel has default Web pages that can be used to read and change
the current settings of the panels. The Web pages can be accessed as follows:
1.
Open your browser and type the IP address of the TLP 350 unit into the address box. The
browser opens the TouchLink panel
Status
page, which is read-only and provides basic
information about the model, date and time, and IP settings.
Figure 22.
System Status Page
2.
Click on the
Configuration
tab and select the
System
Settings
page to modify
information about the IP settings and the date and time settings. These correspond to the
IP
and
Time
settings (see
on page 21) in the on-screen menus.
Figure 23.
System Settings
TLP 350CV and TLE 350 • Configuration Software
27
Summary of Contents for TouchLink TLP 350CV
Page 6: ......