Room Scheduling System • Reference Information
91
VESA Mounting (TLS 1022T, TLP Pro 720T)
�
Remove the back and base covers from the panel.
�
If necessary, cut the zip tie holding the twisted pair cables to the panel base and remove
the cables.
�
Remove the four spanner drive security screws holding the hinges to the panel.
�
Lift the panel away from the base.
�
If necessary, connect the cables and use a zip tie to secure them to the back of the
panel.
�
Secure a VESA D 75 mm mount kit to the back of the panel. Follow the instructions
provided with the mounting kit.
IEEE 802.1X Certificates
IEEE 802.1X is a standard that enables port-based network access control via an
authentication server. The protocol requires that all devices must be authenticated before
gaining privileges to access the secure part of the network.
The Extron implementation of 802.1X supports PEAP - MSCHAPV2 and EAP - TLS
methods of authentication. This section of the guide details the
(see the next
page) to be used in the system.
Extron provides resources for learning about 802.1X implementation:
•
The Extron 802.1X Technology Reference Guide, available from
, is
the primary resource for background information, system planning, topology, and how
to set up these systems.
•
The Toolbelt Help file provides detailed step-by-step information on using the software
to set up 802.1X for TouchLink Pro control systems and on troubleshooting.
•
The 802.1X Primer white paper, also available from
, provides a
general overview of the protocol and its use within a control system.
NOTES:
•
You must run Toolbelt as an administrator.
•
Machine certificates require a private key file, which can be encrypted.
