Extron electronics TLP Pro 1220MG, User Manual

Page: 24 / 40

4. If you have changed any of the values in the
Network
screen, the
background color of the button changes to blue. Press Apply to
apply the new values or press Revert to return to the previous values
without saving the changes. The button returns to gray.
If you have not made any changes, the
Apply
and
Revert
buttons are unavailable for
selection.
Display Screen
Network Status Display Audio Input Advanced Exit
Auto Brightness
On Off
Wake on Motion
On Off
LCD Brightness
2
3
4
Minutes
Sleep Timer
On Off
0 50 100
Figure 10. Display Screen
The
Display
screen allows you to set the
Sleep Timer
,
Auto Brightness
,
LCD Brightness
,
and
Wake on Motion
.
• Sleep Timer — determines how long the panel is inactive before it enters sleep mode,
when the screen goes dark to save power. Select either
On
or
Off
. If the sleep timer is
On
,
use the arrows to adjust the value between
1
and
120
minutes.
•
Auto Brightness — provides a suitable amount of backlighting that is automatically
calculated from the amount of ambient light detected by the light sensor (see figure 2 , C ,
on page 6).
• LCD Brightness — allows you to adjust the screen brightness, using the slider control.
•
Wake on Motion — activates the panel from Sleep mode when motion is detected near the
unit. Select either
On
or
Off
.
0.0.0.10
TLP Pro 1220, TLP Pro 1520, and TLP Pro 1720 Series • Setup Menu 16