Menu PIN
The PIN setup options allow you to enable, disable, or change the setup menu PIN. The PIN is a
4-digit number. Each digit can have any value from 0-9.
1.
Select the first digit of the PIN. When selected, it is highlighted in yellow.
Enter New Menu PIN
4
5
6
7
8
9
0
2
1
3
2
3
4
1
Cancel
Back
Figure 12.
Numeric Keypad for Setting PIN
2.
Press a number on the keypad. That number appears in the PIN.
3.
Repeat steps
1
and
2
for the other 3 digits.
4.
The title bar changes to
Confirm
New
Menu
Pin
.
5.
Enter the PIN a second time. When the PIN entered on the second occasion matches the
PIN entered on the first occasion, the PIN is set and the dialog closes.
Communication LED
The LED can be enabled or disabled.
Calibration Screen
Touch crosshair to calibrate
1024x600
Figure 13.
Calibration Screen
1.
Press and hold down the
Menu
button for at least 3 seconds. The
Menu
button is located on
the rear panel (see
C
on page 5).
2.
Release the button. The calibration screen opens to show cross-hairs.
3.
Follow the on-screen instructions until all five sets of cross hairs have been calibrated (one in
each corner and a fifth in the center of the screen).
4.
The touchpanel exits the calibration screen once the calibration process is completed.
TLP Pro 1022 Series • On-screen Menus
13
Summary of Contents for TLP Pro 1022T
Page 6: ......
