background image

Network

Verify with your network administrator whether the IP address for the touchpanel is assigned by 
Dynamic Host Configuration Protocol (DHCP) or set manually. If they are set manually, you need 
to obtain an IP address, a subnet mask, a gateway address, and a Domain Name Server (DNS) 
from the network administrator.
Press the 

Network

 button in the navigation panel at the top of the screen to open the 

Network

 

screen.

Status

Display

Audio

Advanced

Exit

Network

DHCP

On

Off

Host Name:

DNS Primary:

IP Address:

Subnet Mask:

Domain Name:

Gateway:

MAC Address:

TLP-AB-CD-EF

192.168.254.251

255.255.255.0

0.0.0.0

00-05-A6-AB-CD-EF

Revert

Apply

127.0.0.1

Figure 6. 

Network Screen

1. 

If IP addresses are assigned by DHCP, press 

On

. The selected button is highlighted in 

yellow. If DHCP is selected, you can set only the Host Name and the DNS IP address. All 
other values are set by the DHCP server.

If IP addresses are assigned manually, press 

Off

. When DHCP is Off, all values can be 

edited.

2. 

Edit the 

Host Name

 by pressing that button. A keypad opens:

Figure 7. 

Alphanumeric Keypad

• 

Use the keypad to enter a new name, which appears in the 

Host Name

 text box.

• 

Use the backspace character ( 

x

 ) to delete existing characters.

• 

The right and left arrows move the cursor inside the 

Host Name

 text box.

• 

Click the 

Shift

 key to toggle between upper and lower case letters.

• 

Press 

Enter

 to save the new name.

 

TLP Pro 1022 Series • On-screen Menus

9

Summary of Contents for TLP Pro 1022T


































Reviews: