Using the Software
Designing a graphical user interface (GUI) for the TouchLink panel takes two steps:
1.
Design the layout of the screen text and graphics using GUI Designer.
2.
Assign functions to the text and graphics using Global Configurator.
GUI Designer
— Use the GUI Designer software to design the screen layout for the
third-party touchpanel connected to the TLI Pro 201. See the
GUI Designer Help File
for
step-by-step instructions and more detailed information.
Global Configurator
— Use the Global Configurator Plus and Professional software
to set up and configure the TLI Pro 201. See the
Global Configurator Plus and Global
Configurator Professional Help
File
for step-by-step instructions and more detailed
information. The
Global Configurator Plus and Global Configurator Professional Help File
also includes an introduction to the software and sections on how to start and configure a
project.
Global Scripter
— As an alternative to Global Configurator Plus and Professional, use
the Global Scripter software to program the TLI Pro 201, using Python 3.5 with Extron
Global Scripter modules (see the
Global Scripter Help
file for more detailed information).
Toolbelt
— The TLI Pro 201 can use the Toolbelt software for device discovery, device
information, firmware updates, and configuration of network settings (see the
Toolbelt
Help
file for more detailed information).
TLI Pro 201 • Configuration Software
25
Summary of Contents for TLI Pro 201
Page 6: ......
Page 8: ...TLI Pro 201 Contents viii ...
