Calibration Screen
Touch crosshair to calibrate
800 x 480
Figure 21.
Touch Calibration Screen
1.
Press and hold down the recessed front-panel
Menu
page 12) for at least 3 seconds.
2.
Release the button. The calibration screen opens to show cross-hairs (see figure 21,
above).
3.
Press the cross-hairs on the screen until they move to another area of the screen.
4.
Repeat step 3 until you have pressed all five sets of cross-hairs (one in each corner and
one in the center of the screen).
The touchpanel exits the calibration screen once the calibration process is completed.
TLI Pro 101 • On-screen Menus
22
Summary of Contents for TLI Pro 101
Page 7: ...TLI Pro 101 Contents vii ...
