Input
Network
Status
Output
Audio
Input
Advanced
Exit
Input EDID
Current Native:
1024x768 @ 60Hz
Change Native To:
Match Output
1080p @ 60Hz
Other
Resolutions
1080p @ 60Hz
Project Resolution
Input Audio and Video
Off
On
Input
Audio:
Off
On
HDCP
Authorize:
Follow
Fill
Aspect
Ratio:
Adjust Picture
Figure 16.
Input Screen
Input EDID
The EDID file is stored by the interface and passed to the video source to ensure that the
signal generated by the source is compatible with the display. It determines the resolution and
refresh rate of the signal produced by the video source.
Press one of the three
Input EDID
buttons to determine which EDID will be stored by the
interface and passed to the video source:
Match Output
(default setting) — The EDID matches the native resolution and refresh rate of
the display connected to the HDMI output.
Project Resolution
— The EDID is the one set in the GUI Designer project and can be
altered only by changing the GUI Designer project file.
Show More Resolutions
— Opens a dialog (see figure 15, below) that allows you to select
the resolution and refresh rate for the EDID that will be used.
Custom EDID
Resolution
1024 x 768
1280 x 1024
1600 x 1200
1920 x 1200
720p
Refresh Rate (Hz)
23.98
24
25
29.97
30
OK
Cancel
Figure 17.
Custom EDID Dialog
1.
Select the resolution and refresh rate from the lists.
2.
Click
OK
to save this EDID or click
Cancel
to close the dialog without changing the EDID.
TLI Pro 101 • On-screen Menus
19
Summary of Contents for TLI Pro 101
Page 7: ...TLI Pro 101 Contents vii ...
